The Dakota ZX6 ultrasonic thickness gauge adds an echo-echo / through paint measurement mode to the list of features found on the ZX5 model.

The ZX6 provides flexibility and saves valuable time in the field when testing different materials. Calibration can be manually set to a known material velocity or thickness, or to one of eight common material types stored on the gauge (aluminium, cast iron, plexiglass, polystyrene, polyurethane, PVC, stainless steel and steel).

A high speed scanning mode displays the minimum thickness measured over larger test areas. A differential mode displays any +/- variance from a fixed base value. An alarm mode provides audible and / or visual alerts when readings fall outside defined high or low tolerance levels.

Echo-echo mode measures through paint or protective coatings to read only the base material underneath.

The ZX6 can also operate as a velocity / density / hardness gauge, with readings displayed in m/sec or in/µs rather than mm or inches.

A choice of automatic or adjustable gain / amplification increases accuracy when testing noisy, granular or difficult to penetrate materials. The probe frequency and diameter can also be adjusted to increase linearity and reading accuracy.

For long-term or continuous use, the ZX6 can be powered by a standard USB-C to USB-A cable / power adapter. Live data transfer is also available via USB or an optional Bluetooth module upgrade (see accessories).

Fast, accurate measurements to 0.01mm give you reliable test results. A rugged, water resistant, sealed aluminium casing means the ZX6 is built to withstand everyday use in heavy duty, industrial workplaces.

The ZX6 is ready to operate straight out of the box and is backed by Dakota's legendary 5 years limited warranty.