Thermometers (inc. Infrared)
Our selection of contact & infra-red thermometers ranges from basic, pocket-sized units through to hazardous area rated devices with data logging capabilities and temperature probes for surface measurements. The accuracy of IR thermometers is greatly affected by changing emissivity which is the amount of reflection of the infra-red beam. Look for a unit which allows you to adjust this if the surfaces of the material you are measuring vary between shiny and matt. Distance to spot ratio will also affect the distance from the item to be measured. The higher the ratio, the further away from your source you can afford to be.
6 Item(s)
-
Ecom Ex-MP4a Infrared Thermometer (-18 to 400°C)
See More Information• Intrinsically Safe
• Zone 0 / 1 Approved
• Lowest Cost Ex Certified IR Thermometer on the market -
Fluke 568 EX Infrared Thermometer (-40 to 800°C)
•Intrinsically Safe
• Zone 1 / 0 Approved
• Infrared Thermometer with Data Logging$2,000.00 ex GSTSee More Information -
Extech 42511 Infrared Thermometer (-50 to 600°C)
•Dual laser for accurate targeting with fast (0.15s) response time
• At 12" (30.5cm) distance two laser points converge to 1" target spot
• Temperature range: -58 to 1100°F (-50 to 600°C)
• 0.10 to 1.00 adjustable emissivity increases measurement accuracy for different surface
• 0.1°F/°C max resolution$260.00 ex GSTSee More Information -
Extech 42570 Infrared Thermometer (-50 to 2200°C)
High 50:1 distance to target ratio measures smaller surface areas at greater distances
• Dual Laser Targeting indicates ideal measuring distance when two laser points converge to 1" target spot
• IR Temperature range: -58 to 3992°F (-50 to 2200°C)
• Type K thermocouple input from -58 to 2498°F (-50 to 1370°C)
• White backlit multifunction LCD display with bargraph
• Fast 100 millisecond response time
• MAX/MIN/AVG/DIF feature displays highest, lowest, average, and MAX minus Min values
• Adjustable emissivity increases measurement accuracy for different surfaces
• Adjustable High/Low set points with audible alarm alerts user when temperature exceeds the programmed set points
• USB interface
• Double molded housing
• Complete with Type K Temperature probe, USB cable and software, carrying case and 9V battery$722.80 ex GSTSee More Information -
Metris TN400L Infrared Thermometer (-50 to 400°C)
IR Thermometer
$104.00 ex GSTSee More Information -
TPI 377 Infrared Thermometer (-18 to 1000°C)
Combination non-contact (IR) and contact thermometer. 0 to 1832°F (-18 to 1000°C) IR and -40 to 2,192°F (-40 to 1200°C) contact; depending upon K-type probe
$334.80 ex GSTSee More Information
6 Item(s)