Welcome to Transtek

+61 8 9331 7500

We Value Your Reviews! Accepted reviews earn a 10% discount off your next order! See our Help & FAQ section for full Terms & Conditions


Crystal DataLoggerXP for XP2i Gauges

Designed for use with Crystal's XP2i or XP2i-DP digital pressure gauges, DataLoggerXP firmware upgrade and software provides an integrated data logging solution by collecting, saving and transferring test results to a Microsoft Excel spreadsheet.

If you don't already own an XP2i gauge, you can configure & purchase one complete with DataloggerXP.

DataLoggerXP lets you accurately capture pressure to vacuum transitions, change logging parameters with or without a PC connection, easily start and stop multiple runs straight from the gauge, record at intervals from once per second to once every 18 hours, and record averages, peaks, or just the pressure indication.

For long term pressure testing, the XP2i gauge's ultra low power mode allows you to record up to 32000 measurements over the course of an entire year on a single set of AA batteries. No external power supplies or constant battery replacements required. There really is no easier, intrinsically safe, pressure recording system.

Double click on above image to view full picture

The serial number of each XP2i gauge you wish to upgrade must be entered below. Please separate serial numbers with a semi-colon and ensure the quantity of serial numbers matches the quantity of upgrades required.

* Required Fields

Product As Built:

Manufacturer Crystal Engineering
Manuf. Model DataLoggerXP
Manufactured In U.S.
  • Adds internal data logging capability to an XP2i or XP2i-DP gauge
  • Records up to 32000 data points
  • Adjustable sample rate of up to 1 reading per second
  • Functions can be controlled and configured directly from the gauge
  • Software outputs data as a standard Microsoft Excel spreadsheet
  • Compatible with Windows® 8 and 10
Includes DataLoggerXP upgrade is valid for a single XP2i gauge and is not transferable. If purchased with a new gauge, it will be pre-installed. Otherwise, please confirm the model(s) and serial number(s) of the gauge(s) you wish to upgrade at the time of order.
Warranty DataloggerXP Upgrade Is Unique To A Single Gauge And Cannot Be Removed After Installation. The Licence Is Only Transferable To A Replacement XP2i Gauge If The Original Unit Is Deemed Beyond Economical Repair And Returned To Transtek.
Returns Policy Software is non-refundable other than as allowed by Australian consumer protection legislation. This is due to software licensing restrictions. We encourage you to trial and evaluate this software prior to purchase.

Questions on Crystal DataLoggerXP for XP2i Gauges

No questions asked yet

Ask Your Own Question

Write Your Own Review

Only registered users can write reviews. Please, log in or register