Products

Crystal HPC40 Series Pressure / mA Calibrator

The Ametek Crystal HPC40 Series is the world's first combined pressure and mA loop calibrator to be fully temperature compensated from -20 to +50°C. With a built-in RTD thermometer, you can count on a high level of accuracy whether you're measuring pressure, current, voltage or temperature.

HPC41 and HPC42 calibrators are compatible with Crystal's APM CPF series of external pressure modules and an optional barometric module provides the choice of absolute pressure measurements. Additionally, every unit comes with an ISO / IEC 17025 (NATA equivalent, A2LA accredited, ILAC recognised) calibration report, showing data over the full temperature compensated range.

Email to a Friend

Crystal HPC40 Series Pressure / mA Calibrator

Double click on above image to view full picture

Model *

HPC41 - Single Sensor
HPC42 - Dual Sensor

Barometric Module Enables Absolute Pressure Measurements 700.0 to 1100.0 mbarA Range, 0.5 mbar Accuracy, 0.1 mbar Resolution (Factory Installed)

BARO

RTD Temperature Sensor 4 Wire, Pt100 / 385 RTD -50 to +200°C Range, 0.15°C Accuracy 4mm x 200mm Stainless Steel Probe with 120mm Plastic Handle 3m Spiral Cable with Lemo Connector

127387

Pump System Add a pressure source, case and accessories for a complete calibration kit.

* Required Fields

Product As Built:

HPC40

Qty:

Manufacturer	Crystal Engineering
Manuf. Model	HPC40
Manufactured In	U.S.
Features	Pressure accuracy of 0.035% of reading Compatible with APM CPF pressure modules (see accessories) 7/16"-20 MP female (Crystal CPF) pressure connection Electrical and temperature accuracy of 0.015% of reading 0 to 55 mA input / 0 to 25 mA output 24V DC loop power supply 0 to 400&8486; "true ohm" RTD thermometer Supports 2, 3 or 4 wire RTDs Lemo plug temperature sensor connection High speed switch test mode HART compatible 250Ω loop resistor Compensated for use with media between -20 and +50°C IP65 rated, dust and waterproof housing Rugged, anodised aluminium enclosure Powered mini-USB connection Large, full colour LCD screen Lightweight, compact design (weighs only 690g)
Includes	Adapter (700 Bar), Test Leads, Protective Boot, USB Lead, Batteries, Manual and ISO/IEC 17025 Accredited Calibration Certificate (Item 16 of Our T&C's Applies)
Warranty	12 Months
Returns Policy	Product is built to order and therefore not covered by our 7 day NQA guarantee. Your statutory consumer rights are unaffected.