Welcome to Transtek

+61 8 9331 7500

We Value Your Reviews! Accepted reviews earn a 10% discount off your next order! See our Help & FAQ section for full Terms & Conditions


CorDEX UT5000 Ultrasonic Thickness Gauge

IECEX Ex ib IIC T4 Gb (Tamb -10°C to +50°C)
IECEX Ex ibD T200°C Db (Tamb -10°C to +50°C)
(IECEx BAS 11.0094)

The intrinsically safe CorDEX UT5000 is IECEx and ATEX certified for use in zone 1 (gas) and zone 21 (dust) hazardous areas.

The UT5000 accurately measures material thickness and enables non-destructive testing (NDT) and predictive maintenance (Pdm) on pipelines or fixed assets in potentially explosive environments.

Multiple measurement modes allow the UT5000 to read through paint or coatings, maintain accuracy on uneven surfaces, and detect thickness reduction, pitting or corrosion in test materials. Constant real-time measurements also show maximum, minimum and average values.

A data logging memory stores up to 1000 measurements and a built-in RFID scanner allows records to be tagged with location details and other information. The UT5000 is also supported by CorDEX CONNECT software, which manages device data, enables real-time tracking, schedules maintenance and creates detailed reports.

1 In stock. Discontinued. No backorders available.
$3,915.00 ex GST

Double click on above image to view full picture

Model UT5000
Manufacturer CorDEX Instruments
Manuf. Model UT5000
Manufactured In U.K.
  • Accuracy of 0.05mm
  • Dual-element, 4 MHz transducer
  • Adjustable pulse rate from single shot to 8 Hz
  • Echo-echo mode measures through paint and coatings
  • 1000 point data logging memory
  • Integrated 13.56 MHz (high frequency) RFID scanner
  • Links up to 9 measurements to each RFID tag
  • 3.1" RGB, TFT, full colour, backlit screen
  • IP54 rated, dust and water resistant housing
  • Preloaded or user-defined material velocities
  • CorDEX CONNECT predictive maintenance software
  • Battery provides up to 100 hours continuous use
  • Operating temperature range of -10 to +50°C
  • Optional right or left handed set-up
Includes Unit, Probe, Battery Pack, Calibration Block, Couplant Gel, 5 x ATEX RFID Tags, 2 x Wrist Straps, USB Cable, Software, Hard Carry Case and Manuals
  • Original: 12 Months
  • Discontinued: 6 Months
Returns Policy This is a special offer product, and therefore not covered by our 7 day NQA guarantee. Returns will not be accepted other than under our standard warranty conditions. Your statutory consumer rights are unaffected.

Questions on CorDEX UT5000 Ultrasonic Thickness Gauge

Sort by Descending
  • From Rustem Kushumov at 14/01/2017 5:48 AM
    • What types of materials are able to be measured using the Cordex UT 5000?
    • The CorDEX UT5000 is capable of measuring any material that will transmit a sound pressure wave, with no air gaps or pockets in the material. To obtain an accurate measurement, the velocity of the material must be known. The UT5000 comes preloaded with a wide number of material velocities, and you can optionally add new materials and velocities using the UT5000 Mini-App software provided with the gauge.

Ask Your Own Question

Write Your Own Review

Only registered users can write reviews. Please, log in or register